FLEX NON-CLOGGING SCREENS

Non-clogging-flex screen wires vibrate internally in accordance with the machine vibration in addition to the movements of other normal screens. In this way, the pores are less clogged and the occlusive materials are quickly removed.

Flex Non-Clogging Screens Each wire vibrates in addition to the normal sieve movement. In this way, the pores of Flex Non-Clogging Screens are easily freed and cleans itself. Its efficiency is as high as 50% in screening problems. Flex Non-Clogging Screens are used for screening fine-grained materials with particles that tend to stick when square texture is used. Flex Non-Clogging Screens are made entirely of corrugated or flat, at certain intervals, of wire or Polyürehan. It is based on the principle that individual wires spring up and a stretched wire vibrates easily. It can be assembled as in normal square hole screen fabric. However, for Flex Non-Clogging Screens to be efficient and long-lasting in transverse connections, attention should be paid to having longitudinal or transverse conveyors. Flex Non-Clogging Screens’ features provide maximum screen efficiency by creating large open screen areas as much as possible.

Why Flex Screens are not clogged?

The problem of clogging in screening systems is solved with this type of screen wires. The reason is; It is the fact that the wires between the two supporting bars working independently of each other do not hold the material at the moment of vibration. Therefore, it provides capacity increase as it is not washed.

Why Flex Screens are long-lasting?

The horizontal position of the wire used, the fact that the stone touches the top of the normal screens and does not erode a point extends the life of the screen wire. Depending on the silica state of the aggregate, the life of the screen wire is between 8 and 18 months, depending on the stretching condition. The most important issue here is that the distance between 2 blades should not be more than 250 mm, the excess will reduce the life of the screen wire.